Page 81 Range Brochure

81
Tel: +44 (0)1675 466992 www.sampling.com e-mail: info@sampling.com
Powders
Single Level Sampling
Cohesive Sampler
Single Point Sampler for Cohesive Powders
The Cohesive Sampler is able to take a sample from a known point within
the product.
•
Single Point Sampler
•
316L stainless steel
•
Suitable for sticky, cohesive powders
Part No.
Sample Volume
Nominal
Length
Sampler Diameter
Material
2015A-05
5ml
1000mm
25mm
316L ss
2015A-10
10ml
1000mm
25mm
316L ss
2015A-25
25ml
1000mm
25mm
316L ss
Operation
1. Insert sampler into product ensuring that the sample collecting
chamber is in the closed position
2. At the correct sampling depth, turn the inner tube to expose the
sample collecting chamber
3. Rotate the entire sampler through 360º. The scraper collects product
and guides it into the sample collecting chamber.
4. Turn the inner tube to close the sample collecting chamber
5. Remove sampler
6. Pull out the inner tube and discharge the sample
Rotate the whole
sampler to take
the sample
Close the
sampler and
withdraw it from
the product.
Rotate the inner
core to open the
sampler
Rotate
Product
Enters
Rotate
Product
Enters
Accessories
Additional Tips (rounded or very pointed tips)
See page 60
Cleaning Brushes
See page 177
Storage Case
See page 176
XRF certifi cation
See page 118
Volume 5ml to 25ml