U-D Sleeve Sampler
U-D Sleeve Sampler
Accurate Unit Dose Powder Sampling

The U-D Sleeve Sampler was developed for customers requiring accurate unit dose samples (small volume). The U-D Sleeve Sampler is ideal for use with a wide range of free flowing Powders and Granules.

Different sample volumes can be quickly taken using the same sampler. Simply change the tip to give you a different volume. Sample tips with volumes from 0.1ml to 2.5ml are all kept in stock.

Accurate unit dose sampling is quick and easy with the U-D Sleeve sampler.


Operation

1. Insert the sampler into the product.
2. At the required depth pull up the sampler slightly (this upwards action will force the sleeve down the sample chamber and expose the ports) the product can then fall into the sample chamber.
3. As the sampler is removed the excess powder will fall out of the overflow leaving an accurate volume of powder in the sample chamber.

Unit Dose Sleeve Sampler
To change your sample volume simply unscrew one tip and replace it with the correct size
The Unit Dose Sleeve Sampler set comes in a high quality case

U-D Sleeve Sampler Set (1500S-01) - The set includes a range of interchangeable tips to allow different sample volumes to be taken. Extension rods allow samples to be taken from a depth of up to 3m.

Part No. Description  
1500S-01 U-D Sleeve Sampler Set
Includes:
 
1 x T-bar handle - 600mm
4 x handle extension rods - 600mm
1 x Type 1 sample chamber (for Tips 0.1 to 1.2ml)
1 x Type 2 sample chamber (for Tips 1.3 to 2.5ml)
10 x Sampling tips (0.1ml to 2.5ml - see below)
1 x High Quality Sampler Case - lockable
1500A-01 T Bar Handle 600mm  
1500A-02 Handle Extension 600mm  
1500A-03 Sample Chamber - Type 1 (for Tips 0.1 to 1.2ml)  
1500A-04 Sample Chamber - Type 2 (for Tips 1.3 to 2.5ml)  
1500C-01 High Quality Sampler Case - lockable - with cut outs for sampler components  
XRF Certification XRF Certification  
  Sampling Tips
Tips are available in all sizes from 0.1ml to 2.5ml in 0.1ml increments. (0.1ml, 0.2ml, 0.3ml, 0.4ml etc.)
How to Order a Tip:
Use part number 1500W-XX where XX is the tip size
Example: 1500W-07 0.7ml tip
1500W-23 2.3ml tip
     
Ancillaries Storage Cases


Download Specifications sheet


Download Instructions


Operation

1. Insert the sampler into the product.

2. At the required depth pull up the sampler slightly (this upwards action will force the sleeve down the sample chamber and expose the ports) the product can then fall into the sample chamber.

3. As the sampler is removed the excess powder will fall out of the overflow leaving an accurate volume of powder in the sample chamber.