Powder Lance

Powder Lance


 Cross Sectional Bulk Sampler for Cohesive Powders

The stainless steel Powder Lance can be used to take large volume samples of cohesive powders. The sampler can be used horizontally through a sack or else it can be used vertically to take samples from drums, kegs, super sacks etc….

Type: Cross sectional sampler

Material: 316 stainless steel

 

 


Operation:
1. Insert the sampler into the product.
2. Rotate the sampler through 360°. The Scraper forces the powder in to the sampler along the length of the slot.
3. Remove the sampler.
4. Unscrew the tip of the sampler.
5. Push the Sample Ejection Rod into the Powder Lance to push out the sample

 


stainless steel powder lance is ideal for sampling sticky cohesive powders
The Powder Lance takes a cross sectional sample



Part No Overall Sampler Length Length of Sampling Slot Max Sample Volume
2250A-600 630mm 500mm 190ml
2250A-1000 1030mm 900mm 300ml
2250A-2000 2030mm 1600mm 360ml
       
8570A-700 Sample Ejection Rod - 316 stainless steel - 700mm length
8570A-1100 Sample Ejection Rod - 316 stainless steel - 1100mm length
 
Ancillaries Cleaning brushes - click for details
  Tips - click for details
  Storage Cases - click for details



Operation



Operation:
1. Insert the sampler into the product.
2. Rotate the sampler through 360°. The Scraper forces the powder in to the sampler along the length of the slot.
3. Remove the sampler.
4. Unscrew the tip of the sampler.
5. Push the Sample Ejection Rod into the Powder Lance to push out the sample