SteriWare® Disposable Powder Thief
Disposable Powder Thief

The sterile, disposable PowderThief is ideal for taking representative samples from known locations within the bulk powder. These samplers are available in two convenient lengths and four sample volumes.

Disposable Powder Thief samplers are available sterile or non-sterile.

Assembled & Packed in a Cleanroom
Individually Bagged
Made from FDAor EU conforming HDPE
BSE/TSE Free
Full Batch Traceability
Suitable for use in ATEX zones 0, 1 and 2
Available as gamma irradiated sterile (SAL 10-6)

Operation

1. Insert the sampler into the product. Ensure that the tip is inside the sampler body
2. At the required depth pull up the body to expose the tip. The sample will fall in around the tip
3. Push down body of the sampler to trap the sample
4. Withdraw sampler
5. Pull up body to empty sample
The Dispoable PowderThief is ideal for sampling free flowing powders
The sterile, disposable PowderThief is ideal for sampling powders and granules
Why Use a Disposable Sampler?
  • Cross-contamination risk is eliminated - the device can be used straight from the bag
  • No cleaning is required before or after sampling
  • No cleaning validation (this is very expensive to set up and run)
  • Manufactured in a class 100,000 cleanroom environment (check individual sampler descriptions)
  • Peace of mind
  • Suitable for all industries (pharmaceutical, food, chemical, cosmetic, biotechnology etc.)
  • suitable for use in ATEX Zones 0, 1 & 2 (contact Sampling Systems for full details)
  • Financial
  • Save time and money (it will cost more to clean a reusable sampler than to buy a disposable sampler)
Part No. Pre-Sterilised Nominal Tip Size Nominal Length Overall Diameter Material Quantity Per Box
8060H-501 No 1 ml 500 mm 21 mm HDPE 20
8060H-501S Yes 1 ml 500 mm 21 mm HDPE 20
8060H-505 No 5 ml 500 mm 21 mm HDPE 20
8060H-505S Yes 5 ml 500 mm 21 mm HDPE 20
8060H-510 No 10 ml 500 mm 21 mm HDPE 20
8060H-510S Yes 10 ml 500 mm 21 mm HDPE 20
8060H-520 No 20 ml 500 mm 21 mm HDPE 20
8060H-520S Yes 20 ml 500 mm 21 mm HDPE 20
             
8060H-1001 No 1 ml 1000 mm 21 mm HDPE 20
8060H-1001S Yes 1 ml 1000 mm 21 mm HDPE 20
8060H-1005 No 5 ml 1000 mm 21 mm HDPE 20
8060H-1005S Yes 5 ml 1000 mm 21 mm HDPE 20
8060H-1010 No 10 ml 1000 mm 21 mm HDPE 20
8060H-1010S Yes 10 ml 1000 mm 21 mm HDPE 20
8060H-1020 No 20 ml 1000 mm 21 mm HDPE 20
8060H-1020S Yes 20 ml 1000 mm 21 mm HDPE 20
             
Made from 100% virgin HDPE


Operation


Operation

1. Insert the sampler into the product. Ensure that the tip is inside the sampler body
2. At the required depth pull up the body to expose the tip. The sample will fall in around the tip
3. Push down body of the sampler to trap the sample
4. Withdraw sampler
5. Pull up body to empty sample