SteriWare® Disposable Powder Sampler

Disposable Powder Sampler

The SteriWare Powder Sampler is ideal for taking large volume samples from powders or granules. These samplers can be used straight from the bag and are available sterile or non-sterile.

The Disposable Powder Sampler is ideal for taking a single large volume sample from a single known point.

Assembled & Packed in a Cleanroom
Individually Bagged
Made from FDA and EU conforming HDPE
BSE/TSE Free
Full Batch Traceability
Suitable for use in ATEX zones 0, 1 and 2
Available as gamma irradiated sterile (SAL 10-6)

Operation:


The Disposable Powder Sampler is quick and easy to use:

1. Push the sampler into the product
2. Rotate handle to open up slots
3. After leaving the sampler for several seconds to allow powder to enter, rotate handle to close the sampler.
4. Remove the sampler.
5. Deposit the sample into a suitable container

sterile disposable powder sampler
The dispoable Powder Sampler is quick and easy to use

Sterile, Dispoable Powder Sampler is ideal for use with free flowing powders
Why Use a Disposable Sampler?
  • Cross-contamination risk is eliminated - the device can be used straight from the bag
  • No cleaning is required before or after sampling
  • No cleaning validation (this is very expensive to set up and run)
  • Most devices are manufactured in a class 100,000 cleanroom environment
  • Peace of mind
  • Suitable for all industries (pharmaceutical, food, chemical, cosmetic, biotechnology etc.)
  • Financial
  • Save time and money (it will cost more to clean a reusable sampler than to buy a disposable sampler)

Part No Pre-Sterilised Nominal Sample Volume Overall Length Outer Diameter Material Quantity Per Box
8240H-1000 No 100 ml 1000 mm 40 mm HDPE 20
8240H-1000S Yes 100 ml 1000 mm 40 mm HDPE 20
             
Made from 100% virgin HDPE


Operation


Operation:


The Disposable Powder Sampler is quick and easy to use:

1. Push the sampler into the product
2. Rotate handle to open up slots
3. After leaving the sampler for several seconds to allow powder to enter, rotate handle to close the sampler.
4. Remove the sampler.
5. Deposit the sample into a suitable container