SteriWare® Disposable LiquiThief

Sterile, Disposable Liquid Sampler

The Disposable LiquiThief is essentially a big syringe. The operator pulls up the handle to pull the liquid into the sampler. The further the handle is pulled the bigger the sample volume.

The LiquiThief is available sterile and non sterile.

  • Ideal for sampling low viscosity liquids and oils
  • Fully welded construction (no adhesives or screws)
  • Assembled & packed in a cleanroom
  • Each sampler is individually wrapped
  • Made from FDA acceptable polymers
  • BSE/TSE free
  • Suitable for use in ATEX zones 0,1 & 2 (500mm and 1000mm samplers only)
  • Available as gamma irradiated sterile (SAL 10-6)

Operation

1. Insert the sampler into the product
2. At the required depth pull up the handle. The sample will be drawn into the sampler
3. Withdraw sampler
4. Push down handle to expel the sample

The liquid enters the sampler through a 1.5mm diameter hole
Liquid sampling is made easy with the sterile LiquiThief from Sampling Systems

Why Use a Disposable Sampler?
  • Cross-contamination risk is eliminated - the device can be used straight from the bag
  • No cleaning is required before or after sampling
  • No cleaning validation (this is very expensive to set up and run)
  • Manufactured in a class 100,000 cleanroom environment
  • Peace of mind
  • Suitable for all industries (pharmaceutical, food, chemical, cosmetic, biotechnology etc.)
  • Suitable for use in ATEX Zones 0, 1 & 2 (contact Sampling Systems for full details)
  • Financial
  • Save time and money (it will cost more to clean a reusable sampler than to buy a disposable sampler)

Part No Sampler Length Pre-Sterilised Max. Sample Volume Material Outer Diameter Quantity Per Box
8050H-500 500mm No 100ml HDPE & Silicone 21mm 20
8050H-500S 500mm Yes 100ml HDPE & Silicone 21mm 20
8050H-1000 1000mm No 190ml HDPE & Silicone 21mm 20
8050H-1000S 1000mm Yes 190ml HDPE & Silicone 21mm 20
8050H-1500 1500mm No 290ml HDPE & Silicone 21mm 20
8050H-1500S 1500mm Yes 290ml HDPE & Silicone 21mm 20
             
8050P-500 500mm No 100ml PP & Silicone 21mm 20
8050P-1000 1000mm No 190ml PP & Silicone 21mm 20
Made from 100% virgin polymers



Operation


Operation

1. Insert the sampler into the product
2. At the required depth pull up the handle. The sample will be drawn into the sampler
3. Withdraw sampler
4. Push down handle to expel the sample